Your position: Home > Products > Fused Cast AZS Block

AZS Ramming Mass

  • Bulk density g/cm3: 3.2
  • Thermal conductivity: Good
  • Anti-corrosion property: Excellent at 1300℃
  • particle diameter of grain: 0-5mm
  • Application temperature: Cold/low temperature
  • Used for: Under bottom paving, spreading, Melting end and working area
email.png livechat.png
Share With :
  • AZS Ramming Mass
  • AZS Ramming Mass
  • AZS Ramming Mass
  • AZS Ramming Mass
■ Feature

Open the bag to check if the coagulant agent is dampened or hardened, and then spread the coagulant agent uniformly into the bag;
Mix certain amount of the mass according to on-site assumption. When it mixes well, add room temperature water by a ratio of 6-7%, or adjust the ratio according to local climatic condition and water content of the mixture. Blend it till there is no raw ramming mass left or till that it will break into pieces instantly when it falls to the ground after one unlooses his grip of the mass from the height of 0.33 meters;
The construction site and bonder should be clean and without sundries. The leftover well-mixed mass should be covered with plastic sheet film or placed in shady and cool place. The mass that is not dry and hard can be used again; otherwise, it should be crushed and used together with other raw material or abandoned.
Mix with water to make the material like slurry then press smooth by vibrating.

CONCRETING TIME: BEGINNING TIME: 0:15~2:00 HOURS
FINISHING TIME: 3:00~6:00 HOURS
HEATING TIME: AFTER 150:00 HOURS
THIS MATERIAL IS WITHOUT PHOSPHORUS,AND DOES NOT POLLUTE THE ENVIROMENT.

■ Technical Data
Item Behaviors

 

AZSR-50V AZSM-06J AZSM-05 AZSM-04L
Chemical Composition Al2O3 48 48 48 48
  ZrO2 30 30 30 30

 

SiO2 20 20 20 20

 

Others 2 2 2 2
Bulk density g/cm3 3.2 3.1 3.1 3.1
Crystallographic analysis after being sintered at 1300/1500℃ Corundum, zirconium oxide Corundum, zirconium oxide Corundum, zirconium oxide Corundum, zirconium oxide
Thermal conductivity Good Good Good Good
Anti-corrosion property Excellent at 1300℃ Excellent at 1300℃ Excellent at 1300℃ Excellent at 1300℃
particle diameter of grain 0-5mm 0-0.6mm 0-0.5mm 0-0.4mm
Application temperature Cold/low temperature Cold/low temperature Cold/low temperature Cold/low temperature
Quantity of water 8-10% (proportion by weight) 10-12% (proportion by weight) 10-12% (proportion by weight) 10-12% (proportion by weight)
Solidification Water (ceramic) Water (ceramic) Water (ceramic) Water (ceramic)
Packaging 25kg/bag 25kg/bag 25kg/bag 25kg/bag
Quality guarantee period 12 months 12 months 12 months 12 months
Used for Under bottom paving, spreading, Melting end and working area Under bottom paving, spreading and the place between fused cast brick and ERSOL 50 Under bottom paving, spreading, and the joint between bricks of two layers that are between the fused cast brick and ERSOL 50 Joint between bricks of two layers
Inquiry >>
sunrise@sunriserefr.com0086 371 63838939
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
Middle East Representative
Company: Al-Rehab trading Industrial Service Company
Add: P.O.Box 2248 Amman 11941 Jordan
Tel: +962-6-5354396
Fax: +962-6-5354408
Email:sunrise@sunriserefr.com
Egypt Representative
Company: Twazon for Trading and Agencies LLC
Add: 8 Amoun St. off Elarish street-Elharam - Giza - Egypt
Tel: +2 02 338 68 569
Mob: +2 0100 322 0880
Email: sunrise@sunriserefr.com
Bangladesh Representative
Company: Construction Management & Engineering Cell
Add: Sultan Building (2nd floor), 147 Motijheel C/A, Dhaka -1000, Bangladesh
Tel: +880-2-7167605,7176011
Fax: +880-2-9561867,9562375
Email:sunrise@sunriserefr.com
Please specify a valid email address.
your Name